Monarch Mark IA combines the most popular method of maneuvering the hand controls with the least fatiguing. The brakes are applied using a forward motion, towards the dash. Acceleration is accomplished with a down ward motion towards the users lap with a right angle to the brake. The flat handle is out of the way and can easily be locked when not in use by other drivers.
Push/Rock Hand Controls
These hand controls feature an advanced and streamline design. Simply push the handle forward to brake and pull the handle back to accelerate. As an added safety feature you can use the accelerator lock out when switching drivers.
Push pull Hand Control
These hand controls are operated with an up and down motion and can use vertical or standard handles. If you need to brake you push down. To accelerate you simply pull it up.
MPS hand controls come with a 5 year warranty and will be tailored to your driving needs.
Guido Hand Controls
This hand control will not change the stylish look of your vehicle. A hidden ring sits behind your current steering wheel. It is finished in fine leather, to match your vehicle. To accelerate the controls apply pressure on the ring. Acceleration will stop automatically in the event of hard braking. It also features a 50% switch that will allow you change the sensitivity of the electronic accelerator for more precision in situations requiring slow acceleration, like parking. You will love being able to use both hands on long road trips!
GTS Electronic Over-Ring Accelerator
This stylish hand control can be put directly on top of your current steering wheel (for most vehicles). As you grip the steering wheel you apply pressure on the ring. If you are required to brake suddenly the acceleration will automatically stop. It is equipped with the 50% switch which will reduce the sensitivity of the accelerator for situations when slow acceleration is best, like parking and traffic.
There is no unsighly rods or modifacations on your dash for this hand control. This floor mounted lever is a stylish addition to your vehicle. To use the lever push forward to brake and rotate it for acceleration. Your steering wheel keeps all of its original functions. There is unique saftey mechanisms to prevent the gas and brake from being used at the same time. Additionally, the 50% switch allows you to reduce the acceleration rate to navigate precarious driving conditions.
F1 EVO Floor-Mount Mechanical Accelerator & Brake Lever
This unique hand-control looks just like a floor mounted gearshift. Use your right hand to grip the accelerator and pull or push it to brake. It takes up less room than other floor mounted systems and doesn’t alter your steering wheel. One of the best features of this system is the unique features that allow the pedals to function with the hand-control installed, for amazing ease when switching drivers. Optional features include adding lights, turn signals, wiper controls, and the horn onto the handle.
Modena Electronic Accelerator and Mechanical Brake Lever
You will love the versatility of this hand control. It can be mounted on the right or left side of the steering column. It will be mounted under the steering wheel so you have optimal maneuverability, but also a long enough handle to reach it easily. You operate it by rotating the lever downward to accelerate and push it to brake. It has a built in safety feature to prevent braking and accelerating at the same time. Furthermore, it has a 50% switch that allows you to ease the gas slowly, with more precision.
Viegel Hand controls
4120 Classic II Push Turn
The Classic II has been ergonomically designed to be a fatigue free driving experience. The comfortable handle and grip is customizable to make acceleration easier. Turn the handle clockwise to accelerate and push it forward to brake. The controls are thinner, for more leg room, and can be folded out of the way for other drivers.
4220 Compact II
This control is superbly deisnged for style, ease of use, and quality. Many of today’s cars are smaller and the Compact II will integrate seamlessly. It uses a push/pull motion for operation and included features that prevents using the gas and brake at the same time.
This is an optional addition to the 4120 Classic II or 4220 Compact. It gives the driver secondary controls with just the touch of one finger. It is made specifically for use with Veigel hand-controls. The original lever can still operate as normal.
This floor mounted push/pull hand-control is designed to be used in full sized vans as well as minivans with lowered floors with power steering, brakes, and automatic transmissions. This hand control is very versatile. It can be installed for right or left hand use. It can be positioned in various vertical heights or horizontal positions and even customized for effort required. It is a low cost option to a high tech driving system for drivers with quadriplegia. It comes standard with a turn signal built into the tri pin handle.
Collebuilt Pedal Extension
The Collebuilt pedal extensions are made for drivers that have a hard time reaching their foot pedals. Collebuilt makes gas, brake and clutch pedal extensions that fit nearly all vehicles. The pedal extensions are perfect for drivers who are just a bit too close to the steering wheel or have a hard time reaching the pedals. These components are made from precision formed sheet metal, which is then powder coated. The pedals are engineered to be as light and as strong as they possible. In addition to the pedal extensions, the components come with all the necessary hardware and installation instructions.
There are multiple different styles of steering devices that aid in the ease of steering your vehicle. Meet with a Mobility Specialist and Driving Evaluator to help determine the best style for your needs.
Left Foot Gas Pedal
The MPS Quick Release Left Foot Gas Pedal with Pedal Guard allows the driver to operate the accelerator with the left foot. It is mechanically linked to the original pedal. In addition, the pedal guard blocks the original pedal so it cannot be accidentally pressed. It is lightweight design and has a quick release feature make it quick and simple to remove for a driver that uses their right foot.
The Valet Limited offers more standard power features than any other turning vehicle seat that is currently available. The sleek appearance is incomparable. By pushing one button, the Valet Limited power rotates, reclines, extends and lowers the passenger of the seat.
The Bruno Valet Plus is the most versatile option from Bruno’s Valet Signature Seating line. The Valet Plus is preprogrammed individually to power rotate, extend and lower to an optimal height. The Valet Plus has several enhanced options for further comfort including seat heating.
Bruno’s Signature Seating line offers the Valet LV turning car seat for a sedan. The Valet LV is comfortable, durable and rotates by just pushing a button, eliminating the seat occupant from twisting.
MPS hand controls come with a 5 year warranty and will be tailored to your driving needs.
The XL-seat folds down after the vehicle’s doors are open. After transferring into the folded down XL-seat, the seat’s occupant uses the controller to operate the XL-seat, which takes you up to the driver’s seat. The XL seat includes the retractable support arm for balance and security.
The XL-seat is used for transferring only, and requires no modifications are done to the original chair that came in the vehicle from the factory. With no modifications done to the original seat, all of the special features included with the vehicle from the manufacturer remain functional as they came from the factory. Features like the reclining seatback, or heated seats will remain functioning and intact on the original seat.
If the height of the rocker panel is lowered to the floor of the vehicle, the XL-seat can be stopped at any height, according to the occupant’s needs. The XL-seat is extremely versatile and compact. Installation of the XL-seat requires no major modifications and is installed into the driver or front passenger position’s original floor bolts of Minivans, Pickup Trucks, SUV’s and several Crossovers.
The XL-seat weight capacity is 275 lbs. The vehicle’s battery is the source of power and will not be drained when the XL seat is not being used. The XL seat comes in black, tan or grey. To work the XL-seat you must open the door, and fold the XL-seat downwards. Once transferred into the seat, use the retractable support arm and safely be taken into the driver’s seat.
The XL Base uses the original seat from the vehicle, and is installed under the seat leaving plenty of room for whoever is sitting behind the seat. The original seat can be reclined all the way and the XL-Base won’t even be noticed. The XL base installs into the original seat mounts, with no additional drilling or structural modifications. When you want to sell the car or removed the XL-base, you can easily return your vehicle to the original condition, without affecting the resale value.
The XL Board is a stationary, foldable and also retractor vehicle transfer board that is designed to bridge the gap while transferring from a wheelchair into a driver or front passenger seat of the Mazda 5. This product is designed specifically for the Mazda 5. This vehicle is the only vehicle that offers a sliding door in the central position, which allows for an ideal amount of space to load and unload a wheelchair.
Link is the newest addiction to the Adapt Solutions product line. The LINK is installed without any structural modifications, allowing for ample legroom ensuring the occupant’s comfort. The LINK is very compact and the vehicle’s original seat is always used. The LINK is programmed to bring you out of the vehicle and to a lower level for an ideal height for the occupant to transfer. The LINK also has a lift up feature which tilts the movement of the LINK, slowly assisting the occupant to a standing. The LINK tilts, rotates, reclines and lifts, which are all controlled by the occupant. Not only does the LINK lift the occupant up and out of the vehicle, but the controls also allow for a customizable seating position inside of the vehicle. The weight capacity for the LINK is 300 lbs. The LINK is powered by the vehicle battery, and when the LINK is not in use no power will be drained.
Transfer Seat Bases for most Minivan models (see list below)
These transfer seat bases are available for most Minivan models. The base is a 6-way transfer base that can be used for the driver or a front passenger. The base utilizes the original factory seat, which ensures all of the factory seat functions are maintained. The transfer seat base is mounted to the factory floor mounting holes and “L” track so that no additional drilling is required for most applications. The base features a passive interlock system which provides safety while the vehicle is operating. The passive interlock system is a safety device that returns the transfer seat base to the driving position, ensuring that the seat belt and airbags function as designed. The interlock system transfer seat base features adjustable rotation speed and to control the system there is a choice of a side mounted switchbox or a handheld device. The transfer seat bases are rated for up to 500 pounds. B&D Independence manufacturer over 250 different configurations of the transfer base and has over 300 dealers worldwide that customers can order through.
The 1096 stick steer infrared remote control is a small wireless removable keypad that is attached to the steering wheel. The keypad allows you to control 11 different functions including turn signals, lights, windshield wipers, the horn, etc. The device allows the driver to control all 11 functions while continuing to use the stick steer as their hand control device. The keypad illuminates at nighttime for better visibility. A Daylight sensor turns on the headlights automatically during low visibility scenarios like driving through a tunnel.
Crescent Industries VoiceScan
The VoiceScan is a programmable device that is activated by the push of a button and by hearing a certain command. The VoiceScan is activated by activating the switch. Once the switch is activated and the desired function is heard by the VoiceScan, activate the switch again and the function will start. By activating the switch, a voice will announce the available functions; this voice can be programmed as your own voice. When the desired function is heard, activate the switch again and the function will be selected. The VoiceScan can be programmed in either one or two channel mode, and can control up to 16 functions
MPS Turn Signal Crossover
TThe MPS drop down turn signal lever allows the driver to operate the turn signals more easily. MPS also offers a right turn lever for easier access to the turn signal controls.
ColleBuilt Parking Brake
The power parking brake is perfect for drivers who have difficulty applying the parking brake their vehicle comes with from the factory. The Collebuilt power parking brake can be installed in most makes and models. The components are CNC-machined from anodized aircraft grade aluminum and include an activation switch, circuit breaker and all necessary hardware.
Collebuilt systems has reduced effort solutions for vehicles with both electronic and hydraulic steering. An industry leader in these modifications, Collebuilt provides the potential to offer this modification on almost any vehicle on the market.
The Collebuilt brake systems are installed with an automatic backup system in the event of a power failure. All of the Collebuilt brake kits come with specific instructions, powder coated brackets, and CNC machined aluminum parts, the highest quality aerospace hoses and fittings, circuit breakers and an alarm buzzer.
Reduced Effort Braking
Most manufacturers use vacuum powered brake systems that require 17 to 23 pounds of force for proper braking. Collebuilt offers reduced effort braking modifications for most power brake equipped vehicles. Collebuilt’s low effort braking reduces the necessary braking pressure to 9 to 13 pounds of force depending on the vehicle. Collebuilt no effort braking reduces the necessary braking pressure even more down to 5 to 8 pounds of force needed to apply the brakes, again depending on the vehicle. The Collebuilt brake systems are installed with an automatic backup brake system in the event of a power braking failure. All of the Collebuilt brake kits come with specific instructions, powder coated brackets, and CNC machined aluminum parts, the highest quality aerospace hoses and fittings, circuit breakers and an alarm buzzer.